Single Intel Pentium III family 1.40GHz-500MHz processor
Single Intel FCPGA(2) Celeron 1.20GHz-533MHz processor
Chipset - Intel 815e chipset
Front Side Bus - 133/100/66MHz
Memory
Three 3.3 volt, 168-pin DIMMs (25-degree sockets)
Up to 512 MB unbuffered SDRAM PC 133/100
Standby voltage to support STR (Suspend to RAM)
I/O Expansion
4 32-bit 33MHz PCI bus mastering slots
1 4xAGP slot
Onboard Devices
Two Intel 82559 Ethernet
Two Ultra DMA (UDMA/100) bus master/EIDE channels that support an IDE drive data transfer rate of 100 MHz
4 USB (Universal Serial Bus) ports (two onboard connectors and two headers)
PS/2 keyboard and PS/2 mouse connectors
Two fast UART 16550 compatible serial ports
One ECP/EPP parallel port
One floppy port
Direct AGP w/optional AIMM 4MB display cache
Chassis Compatibility
ATX chassis
Fits SC822, SC811 chassis
PC Health Monitoring Seven onboard voltage monitors for CPU core, +2.5V, +3.3V, + 5V and + 12V Fan status monitor
CPU/chassis temperature monitoring
CPU fan auto-off in sleep mode
CPU overheat LED header
LED and control for chassis intrusion detection
System resource alert
Support for system management software
Auto-switching voltage regulator for CPU core, up to 20A of current
Special Features
Suspend to RAM (STR): All tasks are stored in RAM and can be resumed within seconds from the minimum power consuming suspend mode.
Wake-on-LAN allows for remote network management and configuration of the PC, even in off-hours when the PC is turned off. This reduces the complexity of managing the network.
Onboard auto-switching power regulator supports CPU core voltages from 1.3-3.5 volts
Three tachometer fan connectors (for CPU, chassis and thermal control fans)
Keyboard wake-up from Soft-Off
CPU frequency settings - changeable in BIOS setup
Connector for LED overheat indicator
BIOS Features
Supports ACPI (Advanced Configuration and Power Interface) and APM (Advanced Power Management)
Microsoft OnNow
Slow blinking LED for sleep-state indicator
Main switch override mechanism. Power-up mode control upon recovery from AC power loss
BIOS boot support for USB keyboards
PC Health Monitoring, which allows you to protect your system from problems even before they occur
Three tachometer fan connectors, including one for a thermal control tachometer fan to prevent system from overheating
DMI support
ACPI/APM power management
RTC (Real-Time Clock) wakeup
External modem remote ring-on when system is in Soft-Off state
BIOS rescue hot keys for rescuing the BIOS chip from flash failure
Hardware BIOS virus protection
4 Mb Firmware Hub (AMIBIOS)
Other Features
One WOL (Wake-On-LAN) connector
One infrared connector
One chassis intrusion connector (OEM option only)
Standard Retail Package
One SUPER P3TSSE mainboard
One ball bearing fan with tachometer signal input
One COM2 cable
One floppy ribbon cable
One three-ended 80-wire/40-pin IDE UDMA/100 ribbon cable for high speed UDMA IDE devices