Информационно-справочный портал MorePC.ru

Soltek SL-85DR2-L / SL-85DR2

Processor Intel Pentium 4 processor based on 0.18? core, 400 MHz FSB and mPGA478
Intel Pentium 4 processor based on 0.13? core, 533/400 MHz FSB and mP
Intel Celeron processor based on 0.18? core, 400 MHz FSB and mPGA478
Intel Celeron processor based on 0.13? core, 400 MHz FSB and mPGA478

Chipset

Intel 845E (i845E MCH+ 82801DB ICH4)

i845E MCH:

593 Ball FC-BGA
Supports Socket 478 Processor @ 533/400MHz FSB
Supports DDR 266/200 SDRAM
AGP 4X Interface (1.5 V AGP 4X only)
Features 533/400 MHz Front Side Bus settings
Supports 64Mb, 128Mb, 256Mb and 512Mb technologies for x8 and x16 devices

82801DB ICH4:

421 mBGA
2 channel Ultra ATA-100/66/33 bus
6 USB 2/1.1 ports (max.)
AC'97 2.2 interface
PCI 2.2 interface
LPC interface

Memory

2 x 184-pin DDR DIMM Sockets
Supports up to 2GB (with 512-Mb technology) DDR SDRAM memory space
PC 2100 compliant

Cache Memory

Built-in to Processor Module

On-Board EIDE

2 x PCI Bus Master UATA 100/66/33 IDE ports (up to 4 ATAPI Devices)
Supports for PIO Mode 3, 4, UATA 100/66/33 IDE & ATAPI CD-ROM

Integrated Super I/O

1 x Floppy Port (supports 360K, 720K, 1.2M, 1.44M and 2.88Mbytes)
2 x serial ports (high-speed 16550A FIFO UART Ports)
1 x Parallel Port with EEP/ECP/SPP Capabilities
1 x PS/2 Mouse, 1 x PS/2 Keyboard
6 x USB 2.0/1.1 Ports (four via optional cable)
1 x Audio/Game Port
Rj 45 LAN connector (SL-85DR2-L only)

Expansion Slots

1 x AGP 4X Slot (AGP 4X only)
6 x 32-bit PCI Bus Master Slots
1 x CNR (Communication and Networking Riser)

Form Factor ATX Form Factor (220mm x 305mm)

BIOS

AMI Plug-and-Play BIOS
Supports Advanced Power Management Function
Flash Memory for easy upgrade

Other Features

BIOS FSB Setting Ultra ATA 66/100 BIOS Writing Protection PC 2100 compliant BIOS Vcore Setting AGP and DIMM Voltage Setting SmartDoc. Anti-burning Shield ? H/W Monitor RedStorm Overclocking Technology (optional) Integrated 6-channel AC-97 Audio Audio function An additional Peripheral Power Connector SL-85DR2-l/SL-85DR2 adopts an additional Peripheral Power Connector (the power connector that HDD adopts). Users who installed already an ATX2.03 compliant power supply can use the +12V power Connector designed specially for P4 mainboard. For those who use a non ATX2.03 compliant Power Supply (for example, users that upgrade their mainboards from PIII to P4), they can take advantage of the Peripheral Power connector instead of buying a new P4 Power Supply. This design helps users reduce the cost when upgrade their systems. For P4 processors faster than 2GHz, we suggest users adopt the ATX 2.03 compliant Power Supply.