EliteGroup P4IBMD

• PROCESSOR
  • Socket 478 supports the
  • Intel® Pentium® 4 processor
• CHIPSET
  • Intel® 82845 & 82801BA -- Memory Controller Hub (MCH), I/O Controller Hub 2 (ICH2) & Firmware Hub (FWH)
  • with following features:
  • Supports 4X AGP (AGP 2.0 Specification), 1.5V only
  • Supports Ultra DMA100 (ATA100)
  • LPC I/O: ITE 8712F
  • LAN: RealTek 8100/B (optional)
  • AC97 Audio Codec
  • Compliant with AC97 2.2 specification
• MEMORY
  • Two 184-pin DDR DIMM sockets for 2.5V DDR SDRAM (DDR266/DDR200)
  • Maximum: 2GB
• SYSTEM BIOS
  • Award BIOS with Flash ROM in Firmware Hub (FWH)
  • Supports Plug and Play 1.0A, AMP 1.2, Multi Boot, DMI
  • Full support for ACPI revision 1.0A specification
• I/O INTERFACE
  • Supports Plug and Play function
  • PS/2 keyboard and PS/2 mouse connectors
  • Dual USB Ports and LAN Connector (optional)
  • One - EPP/ECP mode parallel port
  • Two - 16550 high-speed serial I/O port
  • Audio Ports (Line-in, Line-out, Mic-in, CD-in and game port)
  • Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
  • Dual PCI IDE interfaces - support four IDE devices (PIO Mode 4, DMA Mode 2, Ultra DMA66/100)
  • ATX12V Power Supply Connectors
  • Ports, Headers and Others:
  • IrDA header
  • Two additional USB headers
  • Front Panel MIC/Line-Out header
  • HDD LED, ACPI MSG LED, Reset Switch, Power Switch headers
  • CPU, Power and Case Fan headers
  • Smart Card Reader header
  • LAN Card Wake Up / Internal Modem Ring Wake Up headers
• RTC & BATTERY
  • Intel® I/O Controller Hub 2 (ICH2) included 256 bytes of CMOS SRAM
  • With CMOS SRAM hardware clear jumper
• EXPANSION SLOTS
  • 3 PCI slots, 1 AGP slot, 1 CNR slot
• FORM FACTOR & LAYERS
  • microATX (244mm*244mm), 4 Layers