EliteGroup P4IBMD
- PROCESSOR
- Socket 478 supports the
- Intel® Pentium® 4 processor
- CHIPSET
- Intel® 82845 & 82801BA -- Memory Controller Hub (MCH), I/O Controller Hub 2 (ICH2) & Firmware Hub (FWH)
- with following features:
- Supports 4X AGP (AGP 2.0 Specification), 1.5V only
- Supports Ultra DMA100 (ATA100)
- LPC I/O: ITE 8712F
- LAN: RealTek 8100/B (optional)
- AC97 Audio Codec
- Compliant with AC97 2.2 specification
- MEMORY
- Two 184-pin DDR DIMM sockets for 2.5V DDR SDRAM (DDR266/DDR200)
- Maximum: 2GB
- SYSTEM BIOS
- Award BIOS with Flash ROM in Firmware Hub (FWH)
- Supports Plug and Play 1.0A, AMP 1.2, Multi Boot, DMI
- Full support for ACPI revision 1.0A specification
- I/O INTERFACE
- Supports Plug and Play function
- PS/2 keyboard and PS/2 mouse connectors
- Dual USB Ports and LAN Connector (optional)
- One - EPP/ECP mode parallel port
- Two - 16550 high-speed serial I/O port
- Audio Ports (Line-in, Line-out, Mic-in, CD-in and game port)
- Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
- Dual PCI IDE interfaces - support four IDE devices (PIO Mode 4, DMA Mode 2, Ultra DMA66/100)
- ATX12V Power Supply Connectors
- Ports, Headers and Others:
- IrDA header
- Two additional USB headers
- Front Panel MIC/Line-Out header
- HDD LED, ACPI MSG LED, Reset Switch, Power Switch headers
- CPU, Power and Case Fan headers
- Smart Card Reader header
- LAN Card Wake Up / Internal Modem Ring Wake Up headers
- RTC & BATTERY
- Intel® I/O Controller Hub 2 (ICH2) included 256 bytes of CMOS SRAM
- With CMOS SRAM hardware clear jumper
- EXPANSION SLOTS
- 3 PCI slots, 1 AGP slot, 1 CNR slot
- FORM FACTOR & LAYERS
- microATX (244mm*244mm), 4 Layers
EliteGroup P4IBMD Вы можете обсудить на форуме. |