EliteGroup P4IBASD

версия для печати

• PROCESSOR
  • Sockets 478 supports the
  • Intel® Pentium® 4 processor
• CHIPSET
  • Intel® 82845D & 82801BA -- Memory Controller Hub (MCH), I/O Controller Hub 2 (ICH2) & Firmware Hub (FWH)
  • with following features:
  • Supports 4X AGP (AGP 2.0 Specification), 1.5V only
  • LPC I/O: Winbond W83627HF-W
  • VIA VT6202 USB 2.0 Host Controller
  • LAN: RealTek 8100B (optional)
  • CMI9738 AC97 Audio Codec
  • Compliant with AC97 2.2 specification
• MEMORY
  • Two DDR DIMM sockets and 2 DIMM sockets support (can not be used simultaneously)
  • Two 184-pin 2.5V DDR SDRAM (DDR266/200) or
  • Two 168-pin 3.3V SDRAM (PC133/PC100)
  • Maximum: 2GB (DDR SDRAM or SDRAM)
• SYSTEM BIOS
  • AMI BIOS with Flash ROM in Firmware Hub (FWH)
  • Supports Plug and Play 1.0A, AMP 1.2, Multi Boot, DMI
  • Full support for ACPI revision 1.0A specification
• I/O INTERFACE
  • Supports Plug and Play function
  • PS/2 keyboard and PS/2 mouse connectors
  • Dual USB Ports and an optional LAN connector
  • One - EPP/ECP mode parallel port
  • Two - 16550 high-speed serial I/O port
  • Audio Ports (Line-in, Line-out, Mic-in, CD-in and game port)
  • Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
  • Dual PCI IDE interfaces - support four IDE devices (PIO mode 4, DMA Mode 2, Ultra DMA66/100)
  • ATX Power Supply Connector
  • Ports, Headers and Others:
  • IrDA header
  • Additional four USB ports (USB1 or LUSB1)
  • Front Panel MIC/Line-Out header
  • HDD LED, ACPI MSG LED, Reset Switch, Power Button headers
  • CPU, Power adn CHASSIS Fan headers
  • LAN Card Wake Up headers
• RTC & BATTERY
  • Intel® I/O Controller Hub 2 (ICH2) included 256 bytes of CMOS SRAM
  • With CMOS SRAM hardware clear jumper
• EXPANSION SLOTS
  • 5 PCI slots, 1 AGP slot, 1 CNR slot
• FORM FACTOR & LAYERS
  • ATX (304mm*244mm), 4 Layers

EliteGroup P4IBASD Вы можете обсудить на форуме.