EliteGroup L4S5A/DX

• PROCESSORS
  • One Socket 478 supports the
  • Intel® Pentium® 4 processor (478pins)
• CHIPSET
  • SiS®645DX & SiS®961/962 Chipset
  • SiS®961/962 MuTIOL Media I/O
  • Integrated USB 2.0 host controller in SiS®962
  • Integrated IEEE 1394 host controller in SiS®962
  • LPC I/O - IT8705F
  • LAN: RealTek 8100/B (optional)
  • PROMISE PDC20265R IDE RAID controller (optional)
  • AC97 Audio Codec
  • Compliant with AC97 2.2 specification
• MEMORY
  • Three 184-pin DDR DIMM sockets to support
  • Three 2.5V DDR SDRAMs (DDR266/DDR200) or
  • Two 2.5V DDR SDRAMs (DDR333)
  • Maximum: 3GB (2GB only for DDR333)
• SYSTEM BIOS
  • Award 2Mb Flash EEPROM
  • Supports Plug and Play 1.0A, AMP 1.2, Multi Boot, DMI
  • Full Support for ACPI revision 1.0 specification
• I/O INTERFACE
  • Supports Plug and Play function
  • PS/2 keyboard and PS/2 mouse connectors
  • Dual USB Ports and an optional LAN connector
  • One - EPP/ECP mode parallel port
  • One - 16550 high-speed serial I/O ports
  • Audio Ports (Line-in, Line-out, Mic-in, CD-in and game port)
  • Supports eight ATA/ATAPI devices (four optional)
  • Standard: Dual PCI IDE interfaces - support four IDE devices (PIO mode 4, DMA Mode 2, Ultra DMA 66/100, 133 for
  • SiS®962)
  • Option: Two independent ATA channels for another four IDE devices ((PIO mode 4, DMA Mode 2, Ultra DMA 66/100)
  • Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
  • ATX12V Power Supply Connectors
  • ports, Headers and Others:
  • IrDA header (SIR)
  • Front Panel MIC/Line-out header
  • COM2 header
  • Two IEEE1394 headers (optional)
  • Four Extra USB header (LUSB1/USB2 or USB2/USB3)
  • HDD LED, Reset Switch, Power Switch headers
  • CPU, BAK and CHS Fan headers
  • LAN Card Wake Up / Modem Ring Wake-Up Headers
• RTC & BATTERY
  • SiS®961/962 built-in 256 bytes of CMOS SRAM
  • With CMOS SRAM hardware clear jumper
• EXPANSION SLOTS
  • 5 PCI slots, 1 AGP slot, 1 CNR slot
• FORM FACTOR
  • ATX (305mm*244mm), 4 Layers