EliteGroup L4S5A/DX
- PROCESSORS
- One Socket 478 supports the
- Intel® Pentium® 4 processor (478pins)
- CHIPSET
- SiS®645DX & SiS®961/962 Chipset
- SiS®961/962 MuTIOL Media I/O
- Integrated USB 2.0 host controller in SiS®962
- Integrated IEEE 1394 host controller in SiS®962
- LPC I/O - IT8705F
- LAN: RealTek 8100/B (optional)
- PROMISE PDC20265R IDE RAID controller (optional)
- AC97 Audio Codec
- Compliant with AC97 2.2 specification
- MEMORY
- Three 184-pin DDR DIMM sockets to support
- Three 2.5V DDR SDRAMs (DDR266/DDR200) or
- Two 2.5V DDR SDRAMs (DDR333)
- Maximum: 3GB (2GB only for DDR333)
- SYSTEM BIOS
- Award 2Mb Flash EEPROM
- Supports Plug and Play 1.0A, AMP 1.2, Multi Boot, DMI
- Full Support for ACPI revision 1.0 specification
- I/O INTERFACE
- Supports Plug and Play function
- PS/2 keyboard and PS/2 mouse connectors
- Dual USB Ports and an optional LAN connector
- One - EPP/ECP mode parallel port
- One - 16550 high-speed serial I/O ports
- Audio Ports (Line-in, Line-out, Mic-in, CD-in and game port)
- Supports eight ATA/ATAPI devices (four optional)
- Standard: Dual PCI IDE interfaces - support four IDE devices (PIO mode 4, DMA Mode 2, Ultra DMA 66/100, 133 for
- SiS®962)
- Option: Two independent ATA channels for another four IDE devices ((PIO mode 4, DMA Mode 2, Ultra DMA 66/100)
- Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
- ATX12V Power Supply Connectors
- ports, Headers and Others:
- IrDA header (SIR)
- Front Panel MIC/Line-out header
- COM2 header
- Two IEEE1394 headers (optional)
- Four Extra USB header (LUSB1/USB2 or USB2/USB3)
- HDD LED, Reset Switch, Power Switch headers
- CPU, BAK and CHS Fan headers
- LAN Card Wake Up / Modem Ring Wake-Up Headers
- RTC & BATTERY
- SiS®961/962 built-in 256 bytes of CMOS SRAM
- With CMOS SRAM hardware clear jumper
- EXPANSION SLOTS
- 5 PCI slots, 1 AGP slot, 1 CNR slot
- FORM FACTOR
- ATX (305mm*244mm), 4 Layers
EliteGroup L4S5A/DX |
